User's Manual

Turning the knob on the top panel clockwise takes you to the
information screens:
1. T/C + USER BITS
2. TV SYNC TYPE
3. POWER STATUS (external PSU or internal Li Polymer battery)
4. Firmware version and Serial number
5. Jam Timecode**
**For Jam Timecode option the unit needs to be in INTERNAL
GENERATOR mode. Press the button whilst on ‘Jam Timecode’
screen. Choose to Jam via RF or BNC. If a valid T/C source is
available the unit displays ‘Jamming LTC’, then either ‘Timecode
Jammed’ or ‘Jam failed, no signal’.
Button basics
The top button makes it easy to navigate the menu options.
From an information screen…
Press the knob to go directly to the menu for the corresponding feature.
From the default display…
Press the knob to enter the menu for:
1. Timecode mode
2. Int generator
3. RF Settings
4. Backlight
5. System settings
6. Exit
Timecode Buddy: mini trx manual page : 6
Customise
On-screen menus allow you to easily customise the settings of the
Timecode Buddy: mini trx to meet the exact needs of your shoot.
The default display shows (on time-out also):
T/C + FPS + MODE + RF CHANNEL + SIGNAL STRENGTH