User's Manual

Customise
On-screen menus allow you to easily customise the settings of the Timecode Systems
SyncBac PRO to meet the exact needs of your shoot.
The default display shows (on time-out also):
TC + Unit Name + MODE + BLINK ID + RF CHANNEL+ SIGNAL STRENGTH + BATTERY STATUS
Pressing the UP or DOWN buttons on the front panel takes you to the following information
screens:
1. TC, Unit Name, Mode, BLINK ID, RF Channel, Signal strength, Battery status
2. TC, User Bits, FPS
3. Button Lock
4. Power Status and Battery Status
5. Product name, FW version, Serial number
Button basics
Press the large select knob to enter the menu for:
1. Set RF Channel number
2. Timecode Mode
3. System Settings
3. Display Settings