User Guide

If the key fob has already been added, the red LED light will flash
twice.
Deleting Key fob / Tags
To delete a key fob from the keypad, click the (*) wake up key and
then enter
admin password then # 0
The red LED light will turn on. Place the key fob on the key fob
reader. The keypad will beep and the blue LED light will flash once.
Deleting all Key fob / Tags
To delete all paired key fobs from the keypad, click the (*) wake up
key and then enter
admin password then # 0
The red LED light will turn on. Press and hold the
0 button for 3
seconds until a long beep is heard.
Restore Keypad to Factory Settings
Remove the back cover of the keypad. Press the tamper switch
continuously up to 5 times. The Keypad will make a long beep sound
when the default settings have been restored.