User Guide

Disable quick
arm
Passcode required to arm Noah
Default
Setting
Key fob function
Use the provided key fob to
disarm Noah
Default
Setting
Disable key fob
function
Unable to disarm Noah using
the key fob provided
Emergency SOS
with passcode
Enter passcode before SOS
alarm is triggered
Emergency SOS
without
passcode
Press SOS button for 3 seconds
to trigger alarm.
No passcode required
Default
Setting
Power saving
mode
Power saving mode to preserve
battery life. To activate the
keypad, press wake up key ( )
Default
Setting
Power saving
mode off
The keypad LED lights will
remain on and the Key Fob
function will always be active
Adding Key Fobs
The keypad supports up to 50 individual key fobs. To add a key fob to
the keypad, click the (*) wake up key and then enter
admin password
then # 8
Place the key fob on the key fob reader. The keypad will beep and the
blue LED light will flash once.