Keypad User Guide v1.2 The keypad is used to arm or disarm the Noah home alarm system, change it to Home mode or even sound the SOS emergency alarm. It is easily paired with the Noah hub and can be mounted at an entrance or exit. Use the key fobs (included) to easily disarm the alarm system without having to enter the passcode.
Features Green LED: Power on Blue LED flashes once: Arm/Disarm or Home mode Red LED flashes once: Error Tamper Alarm If an intruder attempts to remove or damage the keypad, a tamper alarm is triggered and the user is notified immediately.
Pairing the keypad to the Noah Hub 1. Remove the back cover from the keypad and pull out the battery tab. Then replace the cover 2. Open the Clan at Home app on your smartphone or tablet 3. Click Noah Alarm System 4. Press the icon to enter the accessories menu 5. Press the (+Add) icon. The Noah hub LED will turn purple when it is ready for pairing. 6. Press the (*) wake-up key to activate the keypad 7. Finally, press the SOS button.
The Keypad will appear under “Remote Controls” in the Accessories menu Using the keypad To activate the keypad, press the (*) wake up key, then enter your passcode Default admin passcode: 123456 Default user password: 1234 Arm Arm Noah when leaving your home. Press the (*) wake up key and enter passcode, then press All sensors will be activated. Any sensors that are triggered will immediately sound the alarm. Disarm Disarm Noah when entering your home.
Disarm using the Key Fob Press (*) wake up key then simply place the Key Fob on the Key Fob reader to disarm the system. Home Mode Set Noah in Home Mode. Press (*) wake up key and enter passcode, then press Sensors that are designated in the Home Zone are deactivated, allowing you to move freely in your home. The sensors in Normal Zone will remain active and if triggered, will immediately sound the alarm.
Alternatively, use the provided adhesive stickers to mount the keypad 2. Fix the security screw at the bottom of the keypad Keypad Settings To change settings of the keypad, you will be required to enter the admin mode. Press (*) wake up key and then enter admin password then # 9 The blue LED on the keypad will light up when it is in admin mode. Please note: If there is no activity on the keypad within 30 seconds of entering admin mode, the keypad will automatically revert back to normal mode.
Disable quick arm Passcode required to arm Noah Default Setting Key fob function Use the provided key fob to disarm Noah Default Setting Disable key fob function Unable to disarm Noah using the key fob provided Emergency SOS with passcode Enter passcode before SOS alarm is triggered Emergency SOS without passcode Press SOS button for 3 seconds to trigger alarm. No passcode required Power saving mode to preserve battery life.
If the key fob has already been added, the red LED light will flash twice. Deleting Key fob / Tags To delete a key fob from the keypad, click the (*) wake up key and then enter admin password then # 0 The red LED light will turn on. Place the key fob on the key fob reader. The keypad will beep and the blue LED light will flash once. Deleting all Key fob / Tags To delete all paired key fobs from the keypad, click the (*) wake up key and then enter admin password then # 0 The red LED light will turn on.
Please note: Restoring the factory settings will not delete any paired key fobs/tags Specification: Power supply: 3pcs 1.5V/AAA battery Standby current: <6ɥA Disarm by RFID current: <40mA Housing Material: ABS Plastic Working temperature: -20°C - 55°C | Humidity:80% (non-condensing) Keypad dimensions (L/W/H): 141 x 96 x 14.
