Instructions

The Time Timer Watch Plus uses a red disk to visually
depict how much time remains. As time elapses
clockwise, the disk gradually disappears, helping
you see and manage time more effectively.
For more detailed instructions and how to video, visit the
Time Timer Support Page.
Make every moment count.
GETTING STARTED WITH
YOUR TIME TIMER WATCH PLUS
CHOOSE YOUR MODE
The Time Timer Watch PLUS comes in
three modes: Clock, Time Timer, and Alarm.
Toggle between modes by simply pressing
the MODE button on the upper right.
Clock Time Timer Alarm
1
QUICK START
• To set the watch PLUS is any mode, press
the SET button (top left) for 3 seconds.
• The first value will start to flash. Set that value
by using the Adjust Setting (-) and (+) buttons.
• Once the value is to your liking, press the
NEXT button on the top right.
• Continue setting until all values are selected.
• To exit at any time, press the SET button.
2
Hold SET button
for 3 sec to start.
Press SET to exit
at any time.
+
-
NEXT
CLOCK MODE
The Clock mode displays time of day using
both a traditional analog clock face and
a digital numeric display. If a Time Timer
is running or an Alarm has been set, a
unique icon displays on the right side of
the watch face. Time can be viewed in
12- or 24-hour format.
TIME TIMER MODE
The Time Timer mode includes two options:
1) Original 60-minute Timer or 2) Custom
Timer. The Custom Timer allows the disk to
be scaled to represent any duration from
1 minute to 99 hours. A numeric display of
time remaining is shown below the red disk.
Alert can be set to audible, vibrate, both,
or no alert. Timer can also be set to repeat
upon completion.
ALARM MODE
The Alarm mode can be set in 12- or 24
hour time formats. Set alert to activate
alarm. Alert can be set to audible,
vibrate, both, or no alert.
QUESTIONS? WE’RE HERE TO HELP: [e-mail]
Time Timer Amazon User Guide 02.24.20