User Manual

12
1077 Technical Manual Page | 12
4.8. Opera ti on a s a Li ne Simulator
As a current source the 1077 will
supply the set cur rent to the load
24 Volt Line
In this mode the 1077 supplies a const ant 24V. The current taken by the transduc er can be
accurately measured on the 1077:
1. Turn on the 1077 and select the line position of the load line source switch.
2. Turn the output switch ON.
3. Read output current on the LCD dis play.
I
mA
24 Volts
Transducer