Owner manual

2
V1.1 Page | 2 1065 Technical Manual
Contents
1. S pecification ..................................................................................................... 2
2. Operation .......................................................................................................... 3
3. Guarantee & S ervicing ..................................................................................... 3
All Time Electronics' instruments are subject to continuous development and improvement and in
consequence may incorporate minor detail changes from the information contained herein.
1. Specification
If voltages above 70V DC or 30V AC (RMS) are present the optional terminal shroud
kit (Part No. 9723) must be fitted.
Resistance Range:
0.1Ω to 120kΩ
Accuracy:
0.1Ω decade = ±5%
1Ω - 120kΩ decades = ± 1%
Number of Decades:
6
Increment:
0.1Ω steps
Power Rating:
10 watt per resistor
Voltage Rating:
Maximum 500V DC/AC RMS
Temperature Coefficient:
200ppm/ºC
Residual Resistance:
Less than 20mΩ
Connections:
4 mm terminals. A third terminal is to enable the
case to be earthed or connected to either output.
Dimensions:
W390 x H60 x D150mm
Weight:
2kg
Features:
Ventilated robust metal case and multi-wafer
switches for low switch contact resistance
Optional Extras:
Calibration certificates traceable to NPL and
UKAS (ISO 17025).