Manual

4
1030 Technical Manual Page | 4
2. Specifications
Voltage Ranges: 0 - 1V (1mV resolution).
0 - 100 mV (100µV resolution).
0 - 10 mV (10µV resolution).
8 Volts (10mV resolution)
using external precision 1KΩ resistor supplied.
Current Ranges: 0 - 100mA (100µA resolution),
0 - 10mA (10µA resolution).
Accuracy:
1 Volt range: ± 0.1% of FS ± 30µV.
100mV range: ± 0.1% of FS ± 3µV.
10mV range: ± 0.2% of FS ± 0.3µV.
100mA range: ± 0.2% of FS ± 3µA.
10mA range: ± 0.2% of FS ± 0.3µA.
8 Volt range: ± 0.3% of FS.
Linearity: 0.15% of setting.
Temp. Coeff: 150 ppm of FS /ºC (Outside 18 to 28ºC).
Noise: 30 ppm of full scale.
Battery: 9V PP3 type. Approx. 60 hours life
depending on output current.
Nicad rechargeable available as an optional extra.
Battery Condition: Continuously monitored by front panel indicator.
Output Polarity: Positive or Negative, switch selectable.
A centre Off position is also provided, which shorts
the output terminals together.
Maximum Output Current:
1V, 100mV Ranges: Typically 20 mA.
10mV Range: Up to short circuit value although it should be
noted that loads of less than 1k ohm will give
greater than 0.1% error.
Maximum Output Voltage
(Current Ranges): 8V.
Output Protection: The 1030 can withstand continuous short circuit
or open circuit on all ranges.