Operation Manual

9
Connecting the camera to the software
To connect the camera with the software, open the
‘SYSM Monitor’ program. The desktop icon is called
SYSM Monitor.
When the camera is connected to the router, open the LAN
tab and the camera will automatically appear as shown
below:
The camera will appear blue when it is connected to a
network, red whilst the camera is being viewed and grey if the
camera is offline or fails to connect to a network.
Online Viewing Offline
By logging into WAN, the camera can be viewed using the
Ethernet (internet) cable or wirelessly.
The User name and Password can be
found on the back of the camera.