Operation Manual

Battery Installation

1. Push open the Battery Cover on the side on the Monitor

2. Insert two 1.5V ‘AAA’ batteries

3. Pull the battery cover back over and click to close

Low battery and replacement

When the Monitor is on, the low battery symbol will appear on the screen.

Please replace batteries immediately.

Setting Mode

1. Ensure the Monitor is switched off and press the SET button until 0 or 0.0 is

displayed on the screen. Choose which unit you would like your reading in.

0 is displayed for mmHg reading

0.0 is displayed for KPa reading

2. Press the MEM button to change between users

Then press SET to confirm

3. You will then be asked to set the date. Press the MEM button to change, once

you have reached the correct Year/Month/Date press SET