Owners manual

GMRCK35C TIMBREN INDUSTRIES INC.
www.timbren.com
PART NUMBER DESCRIPTION QTY LOCATION ASSEMBLY NOTES:
F31003-150 NYLOCK LOCKNUT 3/8 UNF GR 5 Z 4 G1C
F40031-020 WASHER FLAT USS 3/8 x 1 GR 2 Z 4 G1C APPLY LEFT/FRONT LABEL TO L/H BRACKET
F11062-150 HCS 3/8 x 1-1/4 UNF GR 5 Z 4 G1C
F11064-250 HCS 3/8 x 1-3/4 UNC GR 5 Z 2 G3D
F11068-250 HCS 3/8 x 2-3/4 UNC GR 5 Z 2 G3C
A00540-65Q30 Hollow Rubber Spring 2 C8B
A25723-90AH00 RUBBER SPACER 4"od x 1" thk w/ AH Bushing 2
K10277LH-003 GM WELDMENT LH - PAINTED 1 D10B
K10277RH-003 GM WELDMENT RH - PAINTED 1 D10A
B90201 LARGE BLUE BOX - 10.5 x 8.5 x 6 1 A1-7E
B10000 8" x 12" BUBBLE FOR KITS 1
B00029-010 BARCODE LABEL FOR KIT 2
Issued: 12/18/2009
Clearance Instructions:
Rear SES Kits for Pick-Ups and Vans should have a 1/2" to 1-1/2" gap between the rubber spring and contact point when empty.
A partial load, or vehicle accessories will reduce or eliminate the gap.
Front SES kits are usually in full contact.
Medium and Heavy-Duty Trucks, Trailers and Motorhomes will be in constant contact, and have no gap.
Lifetime Warranty:
Timbren SES Kits are warranted against defects in material and workmanship, under normal use and service, for the life of the vehicle on which the kit was
originally installed. The warranty is not transferable and proof of purchase is required. The warranty is limited to the replacement of the failed part.
TIMBREN will not be responsible for any labour or freight charges involved in the replacement of any product. TIMBREN shall be entitled to make its own
inspection to determine the validity of the claim. TIMBREN shall not be liable nor warranty the product in the event of alteration, misuse, overload, negligence
or damage caused by others.
If ride or performance of our product is unsatisfactory in any way, please call: 1-800-263-3113 or email [e-mail]