Owners manual

ABSTOF TIMBREN INDUSTRIES INC.
www.timbren.com
PART NUMBER DESCRIPTION QTY LOCATION ASSEMBLY NOTES:
F31051-450 NYLOCK LOCKNUT M10 x 1.25 GR 8.0 Z
2 I1E
F13536-853 SHCS M10 x 30 x 1.25 F/T GR 8.8 B
2 J3D
PRE-ASSEMBLED KIT
USE LOCTITE
A00140-65T00 HOLLOW RUBBER SPRING
2 C7E
A16060-003 STEEL CUP 3 od x 13/32 id x 7/8" deep. Painted
2 D21B
B90215 Carton 8.5 x 6.5 x 5 1 A5A
B10000 8" x 12" BUBBLE FOR KITS 1
B00029-010 BARCODE LABEL FOR KIT 1
B90121-010 OFFROAD KIT BOX LABEL
1
Issued: 10/29/2015
Clearance Instructions:
Rear SES Kits for Pick-Ups and Vans should have a 1/2" to 1-1/2" gap between the rubber spring and contact point when empty.
A partial load, or vehicle accessories will reduce or eliminate the gap.
Front SES kits are usually in full contact.
Medium and Heavy-Duty Trucks, Trailers and Motorhomes will be in constant contact, and have no gap.
Lifetime Warranty:
Timbren SES Kits are warranted against defects in material and workmanship, under normal use and service, for the life of the vehicle on which the kit was
originally installed. The warranty is not transferable and proof of purchase is required. The warranty is limited to the replacement of the failed part.
TIMBREN will not be responsible for any labour or freight charges involved in the replacement of any product. TIMBREN shall be entitled to make its own
inspection to determine the validity of the claim. TIMBREN shall not be liable nor warranty the product in the event of alteration, misuse, overload, negligence
or damage caused by others.
If ride or performance of our product is unsatisfactory in any way, please call: 1-800-263-3113 or email [e-mail]