Compatibility Chart

TimberTech.com
Decking Fasteners
Hidden Fasteners for Full Profile Deck Boards
SS_FASTENERS
Available in:
• 100 ln. ft. - TimberTech PRO and EDGE only (224 2½” carbon steel
screws, 300 plugs, 2 setting tools)
• 100 sq. ft. - TimberTech AZEK only (350 2½” carbon steel screws,
400 plugs, 3 setting tools)
• 300 sq. ft. - TimberTech AZEK only (1050 2½” carbon steel screws,
1200 plugs, 6 setting tools)
• NEW! Plug Replacement Packs available in all colors (40 plugs)
• Can be used on the entire deck surface, including stairs
and perimeters, where other hidden fasteners cannot
• Strongest hidden fastener connection offered by TimberTech
• Features a high-quality, ACQ approved, specialty deck screw
with a TORX
®
ttap
®
drive system
• Plugs are made from TimberTech decking to hide the
fastener
• Color-matched plugs offered in all TimberTech collections
and colors (excluding the scalloped Terrain
™
, Prime+, and
Prime Collection boards)
• Collated plugs with pre-aligned grain pattern provide
50% faster installation available in all TimberTech AZEK
Collections
Cortex
®
Hidden Fastener
Compatible with all full profile TimberTech Decking Lines.
• Cortex plugs made from AZEK Decking
• TORX
®
ttap
®
drive system
• ACQ approved
Available in:
• 100 sq. ft. (365 2” carbon steel screws, 400 plugs, 3 TORX
ttap driver bits)
• NEW! Plug Replacement Packs available in all colors (40 plugs)
Cortex
®
Hidden Fastener for Cladding Applications
Only compatible with full profile deck boards from the TimberTech AZEK Capped Polymer Decking Line
Cortex is a registered trademark of OMG, Inc.
Cortex
®
Hidden Fastener for MAX
Only compatible with TimberTech MAX deck boards
• 305 stainless steel
• Collated plugs with pre-
aligned grain pattern
• ACQ Approved
• TORX® ttap® Drive System
Available in:
• 100 sq. ft. (350 2½”stainless
steel screws, 400 plugs,
3 setting tools)
NEW!
• Sharp point for a fast, easy start that doesn’t require pre-drilling
• Unique geometry to minimize “pig tail” on the side of the board
• Stainless steel to resist screw shear
• Use the SIDELoc Guide to drive screws to the perfect depth and
create automatic ⁄” board spacing
• Compatible with narrow, standard, and wide width decking
Available in:
1⁄” 304 Stainless Steel
• 100 sq. ft. (350 screws, 1 driver bit)
• 200 sq. ft. (700 screws, 2 driver bits)
• 500 sq. ft. (1750 screws, 2 driver bits)
2⁄” 316 Stainless Steel
• 100 sq. ft. (350 screws, 1 driver bit)
• 200 sq. ft. (700 screws, 2 driver bits)
• 500 sq. ft. (1750 screws, 2 driver bits)
SIDELoc
™
Guides
• 3⁄”, 5⁄”, 7⁄” Extension
SIDELoc
™
Hidden Fastener
Only compatible with square-shouldered deck boards
from the TimberTech AZEK Capped Polymer Decking Line
(SIDELoc is NOT compatible with grooved or capped composite deck boards)