Installation Guide

Installing Evolutions Rail
TM
Builder Style with Metal Balusters
Page 5
INSTALL TOP
BUILDERBOARD
7
• Place Top BuilderBoard
on Balusters.
• Make sure Balusters
are all snugly seated on
Baluster Connectors,
then Pre-Drill and secure
Top BuilderBoard with
Brackets.
Start at one end with the top rail
angled upward. Work your way down
the rail by aligning and lowering the
top rail onto each Baluster.
Pre-Drill 9/64”
#10 x 2” Coated Screws
6
INSTALL BOTTOM RAIL
AND BALUSTERS
• Replace Post Sleeves
and Skirts.
• Install Bottom
BuilderBoard by Pre-
Drilling through Brackets
with 9/64” bit and
screwing them to Posts.
• Place all Balusters on
Baluster Connectors.
Screws are designed to go in at a
slight angle.
Pre-Drill 9/64”
#10 x 2” Coated Screws