Installation Guide

Attach Latch and Latch Stop

• Position the gate latch on the Post Sleeve. Pre-drill the Post Sleeve with a

7/64” drill bit. Install the Latch with the Latch lever up, using the provided

screws. Position the Latch Stop on the aluminum Side Rail. Drill a pilot

hole in the Side Rail with a 7/64” drill bit. Attach the Latch Stop using the

3/16” x 3/4” self drilling screws.

UNIVERSAL GATE KIT

5215 Old Orchard Road, Suite 725

Skokie, Illinois 60077

AZEK.com | TimberTech.com