Installation Guide

Page 34
Installing AZEK Rail Stairs with Glass Infi ll
Consult your local building codes for guard and handrail requirements.
• Trim Post Sleeve to
desired length.
• Slide Post Sleeve and
Post Skirt over post.
(do not force).
• Ensure Posts are square
and plumb.
MEASURE RAILS
• Determine
measurements
and angle as
shown. Transfer
measurements to
Top and Bottom
Support Rails.
INSTALL POST
COVERS
Support Rails are rotated 90° for
stair rail applications.
3
1
2
• Ensure Posts are square
and plumb.
Top Rail Length
Bottom Rail Length
Stair Angle
Right
Wrong
TRIM RAILS
• First trim both Top and Bottom Support Rails to dimensions from Step 2. TEST FIT
for accuracy.
• Transfer measurement from Bottom and Top Support Rails to Bottom and Top
Rails.
• Trim all Rails to measured lengths at appropriate angle.
Bottom
Rail
Top Rail
Top
Support
Rail
Bottom
Support
Rail