Installation Guide

Page 25
Installing CableRail by Feeney
®
Stairs for AZEK Rail
THREAD CABLE
6
5
• When all of the hardware is in place, insert one end of the Cable into the Quick-
Connect fi tting.
• Feed the Cable through the Intermediate Baluster (or through posts) with a lacing
needle.
Lacing
Needle
Unscrew the Quick-Connect
swivel fi tting from the post to
measure length of cable
a
Trim Cable at the cut line
on Quick-Connect Swivel
Fittings
b
Insert Cable into Quick-
Connect swivel fi ttings
c
CUT CABLE TO LENGTH