Installation Guide
Page 21
Installing AZEK Rail Stairs with CableRail by Feeney
®
#10 x 2” 
Coated Screws
Bottom Rail
Pre-drill 3/16” 
Use 
Intermediate 
Base Plate as 
template
ATTACH STAIR INTERMEDIATE BALUSTER
PRE-DRILL BOTTOM RAIL
7
6
• Trim Stair Intermediate Baluster to match stair angle.
Screw chase
Bottom Rail
Use the Intermediate Base Plate 
as a Template, as shown to the 
right.
Be sure the screw fi nds 
the screw chase
For easier installation, 
pre-drill screw chase 
with a 3/16” drill bit.










