Installation Guide

Page 7
Installing AZEK Rail Stairs with Balusters
Trim Rails
TRIM RAILS
• Transfer measurement from Bottom Support Rail to Bottom Rail.
• Trim Top Rail to match Top Support Rail at appropriate angle.
3
Support Rails are rotated 90° for
stair rail applications.
• Determine
measurements
and angle as shown.
• Trim both the Top
Support Rail and the
Bottom Support Rail
to those dimensions.
• Test fi t rails to check
for accuracy.
• Trim Post Sleeves to
desired length.
INSTALL POST
SLEEVES
• Slide Post Sleeve and
Post Skirt over post
(do not force).
• Ensure post are
square and plumb.
1
2
Top Rail Length
Bottom Rail Length
•
Trim Top Rail to match Top Support Rail at appropriate angle.
Bottom Rail
Top Rail
Top Support Rail
Bottom Support Rail
Right
Wrong