Instruction Manual

IM2022

8. OPERATION OF THE DEVICE

Control panel:

Fig.9*

1. Double button switch

Used to select the following heating power modes:

Mode 1 (low power)

Mode 2 (high power)

2. Thermostat handle

Used to set the room temperature.

*Image is for reference only and may differ from actual control panel.

Operation of the convector

1. Turning ON

1.1 Plug in the convector to the network by connecting the plug to the electric outlet

2. Heating power mode selection

2.1. Press the “1” button to select low heating power, the indicator light of “1” button will

light during heating.

2.2. Press both "1" and "2" buttons to select high heating power, the indicators of both

buttons will light during heating.