Instruction Manual

IM2022

8 years shall not plug in, regulate and clean the

appliance or perform user maintenance.

 CAUTION! Some parts of this product can become

very hot and cause burns. Particular attention has to

be given where children and vulnerable people are

present.

 If the device was at a temperature below 0ºC for some time, it must be kept at room

temperature for at least 2 hours before turning it on.

 Explanation of warning signs:

Caution! Hot surface Attention! Do not cover

3. APPOINTMENT OF THE DEVICE

Convector heaters are intended for primary or secondary space heating and for

creation of comfortable environment indoors during cold seasons. This device is easy

to use and install, also it is efficient and economical due to minimal energy loss,

increased heat transfer and efficient distribution of air flow. The main advantage of

electric convectors is that their primary function is based on the principle of natural

convection, thus providing a fast and efficient space heating.

4. SPECIFICATIONS

How the device works:

Cold air at the floor of the room passes through the heating element of the convector.

Getting bigger in volume while heating, the warm air rises up through the blinds of the

output grille and spreads across the room. The direction of air flow defined by the

blinds gives an accelerated circulation of warm air inside the room, not dispersing it on

the walls and windows.

Key features:

1. The combination of convection effect with soft heat radiation makes the heater an

economical source of thermal energy, with each year significantly increasing the

number of its adherents.

2. Simple and effective temperature management capabilities.

3. High efficiency and high heating speed.

4. Easy to install, reliable to use and simple to maintain

5. Three-mode heating for energy saving.

6. Support feet for installing the convector in any convenient place.

7. The built-in drop sensor will turn off the convector if it deviates from a vertical

position, for example, if the device is accidentally tipped over when used on supporting

feet.

Dimensions of convectors depending on power

Timberk convectors are divided according to the maximum power consumption of the

heating element and in this they differ from each other by the length of the device with

equal values of height and depth. The standard overall height of all devices is 400 mm.