Instruction Manual

IM2022
27
Table 2
Malfunction
Possible cause
Solution
The device is connected
to the mains, operating
mode is set to heating but
device
doesn’t work.
No power
Check whether the power
supply is disconnected
from
the device and, if
necessary,
connect device to power
supply
Temperature limiter parted
electrical circuit and shut
off
the heating elements
Ensure that the air inlet or
outlet grille is not blocked
by
foreign objects and wait for
turning on of the
temperature
limiter, after the body of
the device cools down.
Malfunction in circuit
breaker
Change the circuit breaker
Defective power relay
Contact an authorized
service center
Defective thermostat
Defective heating element
Faulty temperature limiter
Power cord is broken
Contact an authorized
service center to fix it
Heating is not good
enough
Low voltage in power
network
Check power network
Low heating temperature is
set on thermostat
Set the temperature higher
on thermostat
Defective heating element
Contact an authorized
service center
11. STORAGE
Make sure that the appliance body and its heating element have cooled down before
the appliance is dismantled and packed in its packaging for long-term storage.
Complete all requirements of chapter CLEAN AND CARE.
Reel on the power cord.
When the device is not in use for a long time, store it in a cool, dry place in the original
cardboard box.
12. UTILIZATION RULES
After the lifetime of the device expires, it should be recycled in compliance with the
laws, rules and methods in region of recycling. Detailed information about the recycling