Instructions / Assembly

Included in box:
-40 Pre-cut 12” Planks
-Triangle
-Knot hole stickers
-Extra 3M strip of tape
What you will need:
-Level
-Tape measure
-Utility knife
-Pencil
-Chop saw, miter box
or skill saw.
__________________
When installing
Timberchic make sure
your wall is a dry,
clean, dust free
painted surface.
Have any questions?
Email us:
[e-mail]
Let’s get started!
1) Draw two level lines in the center of your wall; one
horizontal and one vertical using your level.
2) Hold the longest triangle edge on the horizontal line with the
top point centered on the vertical line.
3) Align your first plank with left side of triangle making sure
the top is even with right side of triangle. (ex. A)
4) Align second plank on right side of triangle. (ex. B)
5) Follow the pattern alternating right to left. (ex. C & D)
6) When making your end cuts, the pieces may be small
requiring you to use 3M tape provided to secure if needed.
7) Don’t forget to hide the open knots with the stickers
provided. Place the sticker on the surface behind the open
knot.
Remember have fun!