Use and Care Manual
Storage When you are nished using the heater, you should make sure that the re is
completely out. Allow at least 45 minutes for the heater to cool down before transporng. Store
the heater upright in a sheltered area away from inclement weather such as rain, snow, and
dust. This unit is manufactured as an “Outdoor Unit” from stainless steel. We recommend
purchasing a cover if you live in a parcularly wet climate. Maintenance To obtain the best
performance from your heater, make sure you perform the following maintenance acvies on
a regular basis: Aer a burn and once the heater is completely cooled, clean out any remaining
ashes from on top of the repot, in-between the bars and in the ash pan. Keep exterior surfaces
clean. Use warm soapy water for cleaning. Never use ammable or corrosive cleaning agents on
or near this heater. Airow through the spark arrester must be unobstructed, clean regularly
with canned air. Glass Cleaning Only clean stove glass when the heater is o and fully cooled.
Should a buildup of creosote or carbon accumulate, we recommend wiping the windows down
with a wet rag. If the glass sll appears foggy, a razor blade can be used to scrape away what
remains. DO NOT operate the stove if the glass is broken. Cauon: Never burn sck wood or
plasc or other combusbles in this heater. Burn only ¼” diameter wood pellets. Never spray
any cleaning product on or into any of the doors, air intakes, or dampers.