Instructions / Assembly
6
Included in the box is a bag containing your required hardware:
Count
Part
Application
32
10/32 x 1/2"
Screws
● Attaching (B) Stove top to (K) Firebox - Uses 12
● (J) Firebox Bottom to (K) Firebox - 9
● (A) Stove top collar to (B) Stove top - 4
● (Y) Top Reflector to (X) Stove Pipe Spark Arrestor – 3
● (L) Door Mounting Bracket to (K) Firebox
6
1/4 x 1/2” Screws
● (XZ) Base to (K) Firebox – 4
● (M) Door to (L) Door mounting bracket -2
6
¼ x 7/8” Screws
● (Q) and (Q1) handles to (F) hopper and (O) ashpan - 2 for each
handle. 2 for wheel kit to base.
7
10/32” Nuts
● (A) Stove top collar to (B) Stove top - 4
● (Y) Top Reflector to (X) Stove Pipe Spark Arrestor - 3
4
1/4” Nuts
● (Q) and (Q1) handles to (F) hopper and (O) ashpan - 2 for each
handle
10
¼” Lock Washers
● 2 for wheel kit that attaches to stainless base
● (XZ) Base to (K) Firebox - 4
● (Q) and (Q1) handles to (F) hopper and (O) ashpan - 2 for each
handle
2
Spring Handles
● (R) Door Spring Handle and (S) Damper Spring Handle
4
4
Feet Glides
5/16” Lock
Washers
● (V) Feet Glides to (XZ) Base – 4
● Lock washer to feet glide to Base -4
9
Self-Tapping
Screws
● Self-tapping screws are included to secure the stove pipe. Secure
using 3 screws in each pipe section. (Optional)
Assembly Instructions
Remove vinyl from parts.
Step 1 - Attach Stove Base: Attach wheel kit to base with (2) ¼ 20 x 7/8 Screws and (2) ¼” lock
washers. Lay (K) firebox upside down on a piece of foam provided. Align (XZ) base holes with the
underside of the firebox. Place one lock washer on each ¼ x 1/2’’ Screws and screw into the
threaded holes of the firebox. Screw in the (4) feet glides using (4) 5/16” lock washers to the bottom
corners of the bottom of the base. If you purchased casters, screw in place of the glides with the large
lock washers provided. Return your stove to the upright position.
Step 2 - Installing the Fire Box Bottom Plate and firepot: The (J) firebox bottom is installed, with
the flat surface facing up (½” flanges face down), inside of (K) firebox. The side of the firebox bottom
with 3 threaded holes faces the front of the stove. Attach the firebox bottom using (9) 10/32” screws