Instructions / Assembly

Trouble Shooting

Problem

Solution

Low heat output

Make sure you are using high grade pellets with a BTU rating of at

least 8,200/hr. Douglas Fir pellets are recommended for highest BTU

output.

Proper maintenance of the stove is essential for maximum heat

output. Make sure to clean out the firebox and scrape in-between the

firepot bars. Clear the spark arrestor with compressed air or with a

brush.

Smoke/Burning Dirty

A well-maintained stove with high grade pellet fuel will burn the

cleanest. More oxygen to the fire will produce a cleaner burn which

can be achieved by opening the damper slightly. You should instantly

be able to tell a difference after opening the damper.

7. Temperature Control:

To maximize heat output, close the damper dial completely by turning it until all slots are no longer

visual. To decrease temperature, open the damper to allow air to move through the unit and cool it

down.

8. Service and warranty Information

To learn how to service and procure parts for worn out, defective or damaged components, please

call us directly for assistance. Warning: Use our original equipment replacement parts only. Use of

Unauthorized parts or modification of parts will void warranty and create an unsafe condition.

-------------------------------------------------------------------------------------------------------------------------------------

Patent Pending: woodpelletproducts.com

877-347-2848