Technical Specifications

Knife
SKU: 125-1810
Thickness:
3/4” nominal thickness, Plus 0” - minus
3/64” to ANSI and HPVA standards.
Face Veneer:
HPVA “A” Grade, 1/36” thick, Rotary Cut
Whole Piece Face Red Oak, Sandable
Back Veneer:
HPVA #1 Grade, 1/36” thick, Rotary Cut,
Red Oak, Sandable
Panel Construction: 5-ply Veneer Core,
Oak Face, Oak Back, 7-ply total.
Glue:
Carb 2 Certified
Ultra Low Emitting (ULEF)
Unit Packaging:
Cardboard cover, three plastic bands,
20 pieces. Can be purchased individually.
3rd Party Certification:
SFI - Sustainable Forestry Initiative
ANSI/HPVA - American National
Standards Institute/Hardwood Plywood
Veneer Association
Updated July, 2012
Made i
n t
h
e USA
Rotary C
ut - The entire log is cut or “peeled.” Can yield fu
ll sheets
of veneer. Grain
pat
tern i
s broad with no plain or quarter slice
d appearance.
See Other Side for Back
*Typical Face
*Appearance will vary.
3/4” - 4’x8’ A1 Grade
WPF Red Oak
Rotary Cut, Veneer Core
Hardwood Plywood