Warranty Guide

8
TIMBER CHAMP
STORAGE
 Store the log splitter switched off and unplugged.
 Allow the log splitter to cool for 5 minutes after use before storing.
 Protect the power supply cable from heat, sunshine, aggressive liquids and sharp edges.
 Store the log splitter in a clean and dry area. Don’t store it unprotected outdoors, next
to corrosive materials or in a damp environment. Store the log splitter where
children cannot start it.
MAINTENANCE
 Switch off and unplug power cable before performing any maintenance and repair.
 If the wedge becomes dull or nicked, it can be sharpened. ALWAYS wear safety
gloves while handling the wedge.
 All replacement parts must meet manufacturer’s specifications.
 Check for loose fasteners before each use.
 Grease rack after every 20 hours of use or sooner if necessary.
NOTE: If the motor is overloaded for a long time, the thermal protector will disconnect
the power of the motor. Contact our customer service department if this happens.
NOTE: Switch off and unplug the power cable quickly if the machine is acting abnormal.
Contact our customer service department to address these concerns.