Warranty Guide

6
TIMBER
CHAMP
ASSEMBLY
Tools required: 14mm” wrench
NOTE: This log splitter was partially assembled at the fac-
tory. Refer to the drawing and parts list should it become
necessary to repair replacement parts.
1.
Remove all the components from the box. Inspect each
piece for shipping damage. If any part is damaged,
contact your dealer or delivery carrier.
2.
Securely fasten the foot of the log splitter to the main
beam using the hardware provided.
WARNING: Read and thoroughly understand all instructions and safety informa-
tion before operating this log splitter. Failure to do so may cause serious injury or
death. Do not allow anyone to operate this log splitter who has not read this man-
ual. As with all power equipment, a log splitter can be dangerous if assembled or
used improperly. Do not operate this log splitter if you have doubts or questions
concerning safe operation. Call our customer service department at 720-437-
7640 to address these concerns.
Si no entiende ingles, se prefiere que busque alguien que interprete las instruc-
ciones para usted.