Warranty Guide

STEP 6: Replace Belt and Safety Shroud
1. Hook the belt (4) on the pulley. Place the belt on the flywheel and turn the flywheel until the belt
slips on.
2. Replace the safety shroud making sure the four mounting brackets are on the outside of the
shroud.
Note: Some units may have a double V-pulley. Make sure the belt goes in the inner grove, closest
to the motor.
WARRANTY
Timber Champ warrants to original Purchaser that its product is free from major defects
in material under normal use and service for a period of 1 Year from the date the prod-
uct is purchased. Warranty is void if product has been disassembled by unauthorized
personnel. Timber Champ obligation under this warranty is to repair or replace defective
product upon approval of our warranty service department that warranty claim is valid.
Product shall be returned upon request of Timber Champ. Transportation charges to be
prepaid by seller. Timber Champ assumes no responsibility for outside labor.
THE GOODS SOLD PURSUANT TO THIS AGREEMENT ARE SOLD AS IS BY TIMBER CHAMP.
TIMBER CHAMP MAKES NO WARRANTY. THE ONLY WARRANTY ISTHAT OFTHE MAN-
UFACTURER ANDTHE PURCHASER MUST LOOK SOLELY TO THE MANUFACTURER FOR
WARRANTY. THERE SHALL BE NO LIABILITY FOR PRODUCT LIABILITY OR LIABILITY ON
THE PART OF TIMBER CHAMP FOR ANY GENERAL, SPECIAL OR CONSEQUENTIAL DAM-
AGES ARISING OUT OFTHE SALE OR USE OF ANY PRODUCTS SOLD HEREUNDER. TIMBER
CHAMP MAKES NO WARRANTIES, EXPRESS OR IMPLIED, (INCLUDING, BUT NOT LIMITED
TO, ANYWARRANTY OF MERCHANTABILITY OR FITNESS OFTHE PRODUCTS FOR ANY
PURPOSE) WITH RESPECT TO THE PRODUCTS COVERED BYTHIS AGREEMENT EXCEPT
AS IN THIS PARAGRAPH OTHERWISE EXPRESSLY PROVIDED. THIS ISTHE SOLE AND ONLY
WARRANTY OFTIMBER CHAMP LOG SPLITTER AND NO OTHER WARRANTY IS APPLICA-
BLE, EITHER EXPRESSED OR IMPLIED, IN FACT OR BY LAW, INCLUDING ANYWARRANTY AS