Back to table of contents TiLite manual wheelchairs | Creative Mobility Division Footrest options
How to order Catalog 1. Identify CMDs you wish to order and fill out. Please confirm compatibility with the chair you’re ordering. 2. Fill out the catalog page corresponding to that CMD with the required information for us to complete your request. • EZ-Ti ID, PO#, or Quote# if available. • Measurements, selections, and special instructions if necessary. 3. Email the filled out page(s) to chairs.tilite@permobil.com and include Order Form if applicable. Order Forms 1.
EZ-Ti ID Adapted sized and shaped aluminum footplate PO# CMD #4 Clinical rationale Modification indicated for clients who present with lower extremity positioning and shape that cannot be accommodated with the standard size footplate on the order form.
Adapted footrest and/or front seat width CMD #8 EZ-Ti ID PO# Clinical rationale Modification indicated for clients who have specific positioning needs for their lower extremities that are not indicated on the order form. This modification allows the clinician and the ATP to match the precise size of the client for optimal fit and performance. Available on: TiLite TR, TiLite TRA, TiLite ZR, TiLite ZRA, TiLite Aero T, TiLite Aero Z Notes: • May require a set of squared off extensions in some configurations.
Unique sized footrest loop EZ-Ti ID CMD #21 PO# Clinical rationale Modification indicated for individuals who require a unique sized foot loop to accommodate size and shape of feet and lower extremities. Loop depth Loop width Available on: TiLite TR, TiLite TRA,TiLite ZR, TiLite ZRA, TiLite Aero T, TiLite Aero Z Notes: • Only available on Rigid Frames. • Optional ABS cover (see CMD 050). • Angle Adjustable option is not available with this adaptation (see CMD 004).
Multiple looped titanium footrest EZ-Ti ID CMD #22 PO# Clinical rationale Modification indicated for individuals who require support anteriorly of the frame of the chair to address unique lower extremity positioning needs. Rear footloop Front footloop Available on: TiLite TR, TiLite TRA, TiLite Aero T, TiLite ZR, TiLite ZRA, TiLite Aero Z Notes: • Not available with angle-adjustable footplate. (See CMD 4 for Angle Adjustable options). • Available on rigid chairs only. • Minimum front loop will be 2.
Nylon covered foam pad on footrest EZ-Ti ID CMD #25 PO# Clinical rationale Modification is indicated for individuals who may be at increased risk of skin breakdown on their feet. Available on: TiLite TR, TiLite TRA, TiLite Aero T, TiLite ZR, TiLite ZRA, TiLite Aero Z Notes: • Only available on Rigid chairs. • Only available for Titanium w/ Flat ABS Cover or Angle Adjustable Footrests. • Option of 1” or 2” Foam Pad. • Foam Pad is covered with Ballistic Nylon. May not work with all chair configurations.
Forward mounted footplate EZ-Ti ID CMD #30 PO# Clinical rationale Modification is indicated for individuals whose lower extremity positioning cannot be accommodated by combination of seat depth, frame depth and front angle bend. Available on: TiLite TR, TiLite TRA, TiLite ZR, TiLite ZRA, TiLite Aero T, TiLite Aero Z Notes: • Available on rigid chairs only. • Can be: • Angle Adjustable (no charge). • Titanium w/ Flat ABS cover. • Titanium Open Loop. • May not work with all chair configurations.
No footplates on rigid models EZ-Ti ID CMD #32 PO# Clinical rationale Modification is indicated for individuals who utilize a bilateral lower extremity propulsion technique and require the benefits of a rigid frame manual wheelchair. Available on: TiLite TR, TiLite TRA, TiLite ZR, TiLite ZRA, TiLite Aero T, TiLite Aero Z Rigidizer bar depth Notes: • Signed CAD drawing required. • Front Frame Rigidizer Bar is required. • May not work with all chair configurations.
EZ-Ti ID One piece flip-up footplate on rigid and folding chairs PO# CMD #35 T-chairs Clinical rationale Modification indicated for people who may require footplate to flip up in order to get feet on the ground, ie, a stand-pivot transfer. Available on: TiLite TR, TiLite TRA, TiLite ZR, TiLite ZRA, TiLite Aero T, TiLite Aero Z Z-chairs Notes: • Extra rigidizer bar is required. • Angle Adjustable footplate only. • Signed CAD needed.
Two piece flip-up footplates EZ-Ti ID CMD #40 PO# Clinical rationale Modification indicated for individuals who present unique foot positioning in a rigid chair that cannot be accommodated via one piece footplate. T-chairs Available on: TiLite TR, TiLite TRA, TiLite ZR, TiLite ZRA, TiLite Aero T, TiLite Aero Z Z-chairs Notes: • Extra rigidizer bar is required. • Footrest will be aluminum powder coated black. • Signed CAD needed.
Unique sized footrest risers EZ-Ti ID CMD #42 PO# Clinical rationale Modification indicated to provide support for individuals that have a lower leg length that standard footrest height will not accommodate. Available on: TiLite TR, TiLite TRA, TiLite ZR, TiLite ZRA, TiLite Aero T, TiLite Aero Z Notes: • Only available on Rigid Frames. • Only available with Angle Adjustable footplate (this will not work on flip-back or titanium ABS/Open Loop footrest options).
Weighted footrest EZ-Ti ID CMD #45 PO# Clinical rationale Modification indicated for individuals who may have had a lower extremity amputation and require additional weight at the front of the chair for balance. Available on: TiLite TR, TiLite TRA, TiLite ZR, TiLite ZRA, TiLite Aero T, TiLite Aero Z Notes: • Only available on non-pediatric rigid chairs. • Selectable weights range from 5 to 20 lb, in 1 lb increments. • Final weight will be within 1/2 lb of call-out. • Not available with flip-back.
Adapted shaped/sized ABS footplate EZ-Ti ID CMD #50 PO# Clinical rationale Modification indicated for individuals who present with lower extremity positioning that standard size cover does not accommodate. Available on: TiLite TR, TiLite TRA, TiLite ZR, TiLite ZRA, TiLite Aero T, TiLite Aero Z Notes: • Available on rigid chairs only. • Titanium open loop footrest may be required. • May require a squared off footrest adaptation (see CMD 071) or other footrest adaptation.
2” sided ABS footrest cover EZ-Ti ID CMD #49 PO# Clinical rationale Modification indicated for individuals who require support laterally on their footrest to keep maintain positioning on the footrest. Available on: TiLite TRA, TiLite ZR, TiLite ZRA, TiLite Aero T, TiLite Aero Z Notes: • Available on rigid chairs only. • Available adaptations include, but are not limited to, depth and width. • Contact customer service for additional variations. • May not work with all chair configurations.
Tubular flip-up footplates EZ-Ti ID CMD #61 PO# Clinical rationale Modification indicated for individuals who require or prefer a loop style footrest instead of a plastic style footrest. Available on: TiLite TR, TiLite TRA, TiLite ZR, TiLite ZRA, TiLite Aero T, TiLite Aero Z, TiLite Aero X, TiLite 2GX Notes: • Rigid frames require extra rigidizer bar (see CMD 40). • The footrest loops will only be made up to an 18” front-width equivalent. • Not available with V-front end.
Titanium angle-adjustable footrest extensions CMD #55 EZ-Ti ID PO# Clinical rationale Modification indicated for individuals who require/desire optimal weight and strength for their footrest extensions. Available on: TiLite TR, TiLite TRA, TiLite ZR, TiLite ZRA, TiLite Aero Z, TiLite Aero T Footrest extensions Notes: • Not intended for Heavy Duty wheelchairs. • May not work with all chair configurations. • Extension finish will be blasted satin.
Squared off titanium footrest EZ-Ti ID CMD #71 PO# Clinical rationale Modification indicated to allow for added surface area across width of the footrest tube offering additional lower extremity positioning and foot placement options while maintaining optimal taper. Available on: TiLite TR, TiLite TRA, TiLite ZR, TiLite ZRA, TiLite Aero Z, TiLite Aero T Notes: • May not work with all chair configurations. • If retrofitting an existing wheelchair, a SN will be needed to ensure proper design.
Adapted footrest height adjustment EZ-Ti ID CMD #72 PO# Clinical rationale Modification indicated for individuals with lower extremity measurements that require a specific seat to footrest measurement not available on the standard order form. Available on: TiLite TR, TiLite TRA, TiLite TX1, TiLite ZR, TiLite ZRA, TiLite Aero T, TiLite Aero Z Notes: • Available on TiFit Model Wheelchairs only. • May not work with all chair configurations.
Front roller EZ-Ti ID CMD #80 PO# Clinical rationale Modification indicated when footplate to floor height is lower than 2”. This roller contacts elevated surfaces (such as thresholds) first, allowing the chair to continue forward movement as contact occurs. Available on: TiLite TR, TiLite TRA, TiLite ZR, TiLite ZRA, TiLite Aero T, TiLite Aero Z Notes: • Only available on rigid frames. • Titanium or Angle-adjustable footrest is required. • Signed CAD will be required. • There must be 3.
Titanium painted footrest EZ-Ti ID CMD #83 PO# Clinical rationale Modification indicated for individuals who require/request a footrest that complements and matches the color of the wheelchair frame. Available on: All chairs that receive a titanium Open Loop or Flat ABS footrest option Notes: • Cannot be a double coat on ZR/ZRA. • May not work in every configuration.
V-front in 1/2” increments EZ-Ti ID CMD #84 PO# Clinical rationale Modification indicated for both lower leg positioning benefits as well as to reduce overall width between casters for improved accessibility in tight spaces. Available on: TiFit rigid chairs Notes: • May not work with all chair configurations.
TiLite manual wheelchairs Creative Mobility Division 2701 West Court St, Pasco, WA 99301 Phone +1 509 586 6117 | 800 545 2266
