Instructions / Assembly

Copyright © 2021. Tile Redi Sales, LLC. All Rights Reserved 2 Rev. 20210219
III. HOW TO INSERT THE TILED DRAIN GRATE
INTO THE TILED SHOWER PAN FLOOR: (See
Figs. 1 & 3)
1. Insert the Rubber Bumpers into the
Tileable Drain Grate side holes by inserting
them into the holes until they are locked
in place (Fig. 1).
2. Slide the tiled drain grate into the shower
pan Trench Recess, first by compressing
the side of the grate with the Rubber
Bumpers against the wall of the shower
pan Trench Recess (Fig. 3).
3. Finally, slide the other side of the tiled
drain grate into the shower pan Trench
Recess.
IV. HOW TO REMOVE THE TILED DRAIN GRATE
FROM THE TRENCH RECESS: (See Fig. 4)
1. Insert your fingers or an Allen wrench into
the space between the Tiled Drain Grate
and the Trench Recess wall (i.e., either
between E and F or between G and H),
carefully lift out one side of the grate and
grab it with both hands and then carefully
remove the other side by lifting the entire
grate with your hands.