Use and Care Manual

TIKI

BRAND PATIO FIRE PIT USER GUIDE

6 7

Remove the ash pan (F) and cone (C) from

the Fire Pit (A) and set aside.

STEP 1

Place the Fire Pit (A) on top of the foot ring (B)

ensuring the 3 tabs on the foot ring align with

the 3 holes at the base of the Fire Pit and secure

with 3 screws (H) using the supplied Hex Key.

STEP 3

Separate the Fire Pit (A) from the foot ring (B)

and place the foot ring on its feet.

STEP 2

Light all 4 corners of the Wood Pack (E). The

safest method for igniting is to use a long-

stemmed match or lighter and ensure you are

not wearing loose clothing. You should see a full

ﬂame in under 5 minutes.

STEP 2

Center the cone (C) in the Fire Pit

(A). The cone optimizes air ﬂow and

performance of the Wood Pack.

Center the Wood Pack (E) over the

cone (C) in the Fire Pit (A).

STEP 1

You can use Wood Packs (see below)

or natural cut ﬁrewood (see page 8)

to light your ﬁre.

Replace the ash pan (F) and

cone (C) back into the Fire Pit.

STEP 4

CAUTION: Keep clothing, hair and face away

from ﬂame when lighting.

Assembly Light your Fire Pit

Light your Fire Pit

using Wood Packs

CAUTION: Some parts may contain sharp edges. Wear protective gloves when assembling, moving,

or handling product.