SDS

SECTION 9
PHYSICAL AND CHEMICAL PROPERTIES
Note: Physical and chemical properties are provided for safety, health and environmental considerations only and
may not fully represent product specifications.
GENERAL INFORMATION
Physical State: Liquid
Form: Liquid
Color: Clear
Odor: Mild Petroleum/Solvent
Odor Threshold: Not Available
IMPORTANT HEALTH, SAFETY, AND ENVIRONMENTAL INFORMATION
Vapor Density Not Available
Specific Gravity (at 15.6 °C): .805 - .855
Flash Point, Closed cup: 196°F - 297°F / 91°C - 147°C
Boiling Range: Not Available
Flammable Limits (Approximate volume % in air): Not Available
Autoignition Temperature: Not Available
Decomposition Temperature: Not Available
Viscosity: 2.4 cSt – 5.7cSt at 40 °C
Vapor Pressure: Not Available
)
Evaporation Rate (n-butyl acetate = 1): Not Available
pH: Not Available
Solubility in Water: Negligible
Pour Point: -57°C – -12°C / -71°F – 10°F
Melting Point: Not Available
SECTION 10
STABILITY AND REACTIVITY
Possibility of hazardous
reactions
:
Hazardous polymerization does not occur. Stable under
normal conditions.
Conditions to avoid
:
Extremes of temperature and direct sunlight.
Incompatible materials
:
Reactive with oxidizing agents.
Hazardous decomposition : May release COx, hydrocarbons, smoke and irritating vapours. when
heated to decomposition
SECTION 11
TOXICOLOGICAL INFORMATION
INFORMATION ON TOXICOLOGICAL EFFECTS
Toxicity Data
Toxicity Data
Test Result Route Species
LD50 >5000 mg/kg Oral Rat
LD50 >2000 mg/kg Dermal Rabbit
LD50 >2300 mg/m³ (4 hours) Inhalation Rat
SECTION 12
ECOLOGICAL INFORMATION
The information given is based on data available for the material, the components of the material, and similar materials.
ECOTOXICITY
Not Available
PERSISTENCE AND DEGRADABILITY
Biodegradation: