User Manual

[e-mail]
7
* Follow us on YouTube (keyword: TIGERSECU) to watch the instruction videos
1. Install/Exchange a Hard Drive
* A hard drive is required if you want to save the recordings.
* For DVR models with the pre-installed hard drive, this step can be skipped.
Follow the instructions below to install or exchange a hard drive.
A) Use a screwdriver to open the box.
B) Remove the top cover.
C) Compare the hard drive (HDD) with the mounting holes on the bottom cover.
D) Connect the power and SATA cable to the hard drive while paying attention
to the orientation of the HDD.
E) Carefully place the hard drive to match the mounting holes on the bottom and
the side of the DVR.
F) Secure the HDD to the bottom cover with screws from the bottom or side.
2. Connect the DVR to a TV/Computer Monitor
* VGA/HD-port cable is not included in the package.
* A monitor is required for all DVR models to set up the system.
Connect your DVR to a computer monitor or TV screen using a VGA/HD-port
cable.
3. Connect the DVR with the Cameras
* Cameras, camera power adapter, BNC cables, and power splitters might not
be included with TIGERSECU DVRs.
Installation Guide