TIGERSECU Super HD 1080P 8-Channel Hybrid 4-in-1 DVR Security Recorder Without Hard Drive, for 2MP TVI/5MP TVI/AHD/CVI/Analog Cameras (Cameras and Hard Drive Not Included) : User Manual : Page 38

service@tigersecu.com

37

Step 1: Download and install TIGERSECU CMS on your computer.

Download Link: http://www.tigersecu.com/cms-win.zip

Step 2: Open the software, and you will see the login page like the one below:

*You may click the drop-down menu to avoid entering the information

repetitively.

Step 3: Type your Login information.

① P2P(UID) Login (Highly Recommended)

a) Go to DVR Menu bar > Information > UID. Enter the UID in the Host field.

b) Default Port: 80

c) Default User: admin.

d) Default Password: 00000000 (eight zeros)

e) Click Connect.

(You may change the Port, User, Password in the DVR settings. Please revise

accordingly on your computer after changes are made on the DVR side.)

Tip: If you’ve successfully logged into the system by following the instructions

above, please ignore the instructions below regarding IP Login & DDNS Login.

② IP Login (Port forwarding required)

a) Assign a Port for your DVR.

Go to Network Menu > Network. Choose Static IP, then Assign a port (> 80)

to the DVR, for example, 6789, then check Enable and click Apply.

b) Log into your router.

Look for the Default Gateway: It should look something like 192.168.1.1, but

View DVR Remotely on your computer