Instruction Manual

www.tigerlifting.com
Home of the Tiger hoisting, clamping, winching and height safety ranges
Our innovation, your safety
11 May 2021 Page 4 of 8
HOISTING
Hooks:
Our hooks incorporate our patented “EZ Check” feature which allows operators
and inspection engineers to easily check to see if the hoist has been previously
overloaded or shock loaded by simply measuring between the triangle of pop
marks.
Our drop forged and heat treated alloy hooks are furnished with heavy duty
spring latch kits that fully engage into the recessed nose of the hook
safeguarding the load when side loading of the latch occurs and offering
maximum load security. The swivel hooks are attached to the yoke using high
grade nuts & bolts allowing for complete inspection during any statutory
inspection or written scheme maintenance.
Available with hooks that swivel under the full working load limit, to meet
relevant standards i.e. AS 1418.2. Also available with spark resistant hooks.
Forgings:
Recessed hook yoke forgings offer full protection to the load chain anchor bolts
on all our bottom hooks.
Precise tolerances in the bottom hook yokes means foreign objects are restricted
from entering the load sheave area and chain can’t get twisted.
Combination Trolley and Block:
The top hook can be replaced by a competent person so the PROCB can be
directly fitted to our beam trolley range of the equivalent capacity achieving the
lowest possible headroom.