Data Sheet

For more information, please refer to www.cetus3d.com
Extruder Unit Build Plate Spare Screws
PLA Filament Sample 50g x 3 USB Cable Power Cable
Power Adapter Plier Scraper
Hex Key Nozzle Wrench 0.2/0.4/0.6mm Nozzle
Spool Holder Kits Calibration Sticker x 4
1. Install the Axis Assembly to the Main
Seat
1
Plug the short plug into the socket on
the Z-Axis.
2
Mount the Axis Assembly to the Main
Seat with included screws.
3
Plug the long plug into the socket on
the Y-Axis.
2. Install Build Platform
1
Place the Build Platform on the Main Seat
and align the three screw holes.
2
Lock the screws.
Note: (1) The device is pre-leveled in factory. There is no need to level the build plate.
(2) It is only need to install three screws. Do not remove the top right screws.
3. Install the Extruder Head to the Y Axis
1
Mount the Extruder Unit on the Y-Axis with 2 screws provided on the linear bearing.
2
Connect the Extruder Connector to the Extruder Unit.
SETUP PRINTER
• Download and Install Cetus3D software: https://www.cetus3d.com/software.html
• Start to Print by clicking the print icon on the software main menu.
Note: Initialization is required every time when the machine is powered on, this is in order to
determine the correct position.
SETUP PRINTER
1
Click the Setting icon at the top right corner.
2
Select Printer.
3
Click the Printer Detail button.
4
Click the Network dropdown menu to select an available network.
5
Input the password for the Wi-Fi network
Note: The computer and printer must be in the same WLAN (same SSID) before connecting.
ADJUST THE NOZZLE HEIGHT
1
Go to “Calibration”.
2
Press button 5 to move the Nozzle to the middle of the build platform.
3
Use the + button to lower the Nozzle to close proximity of platform.
4
Put a paper in between the Nozzle and Platform, lower the nozzle and feel the drag be-
tween paper and nozzle. At the correct height, the paper should be able to move freely
but user should able to feel a small drag from the nozzle.
5
Note the current nozzle height and deduct the value of it by 0.5mm and press “set”
button to save the value as nozzle height (for printer with raft).
For Example: If the nozzle position determined by the paper is 181.5, you have to set the nozzle
height to 181.0
LOAD FILAMENT
1
Go to “Maintenance”.
2
Select the Material from the dropdown material list.
3
Input the lament Weight.
4
Click “Extrude” to heat up the nozzle. When the lament melting temperature is reached,
the printer will buzz and begin to extrude.
5
Install the guiding tube, insert the lament into guiding tube. When the printer buzz,
insert the lament into the extruder unit gently.
Z-Axis
Y-Axis
Extruder Unit
X-Axis
Build Platform
Main Seat
USB Connector
Power Connector
Power Switch
Extruder Unit
PLA Filament Sample
50g x 3
USB Cable
Power Cable
Build Plate Spare Screws
Power Adapter
Hex Key
Plier
Spool Holder Kits
Calibration Sticker x 4
Scraper
0.2/0.4/0.6mm
Nozzle
Filament
Guide Tube
1
2
3
Z-Axis
Y-Axis
Long Plug
Short Plug
1
2
2
1
Nozzle Connector
Account
Back to Home
Add a Model
or Picture
Print
Initialize
Calibration
Maintenance
Settings
Share
Skin
Model Adjust
-
ment Wheel
Build Space
Too Low
Just Right
Too High
Back Side
Plastic Cable
Buckle
Mirror
Delete
Save
Reset
Move
Scale
View
Wheel Menu
Rotate
Auto Place
Undo
Fix Errors
Undo
2nd Level Menu
1
2
3
4
5
Current Nozzle Height
Setting Value
1
4
0.30
5 0.00
6 0.00
9 0.00
8 0.00
7
0.10
Manual
Auto Level
Reset
Nozzle Height
181
Move
_
0.00
_
_
Set
Nozzle Detect
Confirm
Cancel
2
3
Manual
Auto Level
Reset
Nozzle Height
181
Move
_
181.0
_
_
Set
Nozzle Detect
Manual
Auto Level
Reset
Nozzle Height
181
Move
_
181.5
_
_
Set
Nozzle Detect
Paper
LOAD AND PRINT A MODEL
1
Go to Add model “
+
”.
2
Select
icon to open a 3D model.
3
Choose your model.
4
The loaded model will appear on the Build Space.
5
Click “Print” to open the Printer Setting window.
ACTIVATE MACHINE
We recommend you to register an account and active your printer to get fully access to functions of
3D printer.
1
Select Account on the software main menu.
2
For a new user, click “Sign Up” to create a user account.
3
Register your account including Username, Email and Password. Go to the registered
email and click the activation link.
4
Connect your printer to computer. In the software, go to account section and login, click
“Activate” to activate the machine.
1
2
3
4
5
Normal
Set Layer Thickness
Select Inll Type
Select Print Quality/Speed
Advanced Options
1
2
Activate
Bind
4
33
COMPLIANCE
RoHS
Nozzle Wrench
X-Axis Z-Axis Y-Axis
INITIALIZE PRINTER
Long press the front button to initialized the printer, the 3
axes of the printer will move to endpoint and stop.
1 7
8
9
10
11
2
4
5
6
4. Manage the Cables
Use the Plastic Cable Buckles on the back
of the machine to manage cables.
3
Although the printer is pre-calibrated in factory. There is a chance that one or
more axis cannot nd their endpoints due to slight physical expansion/shrinkage of
aixs during shipping. This will result in axis hitting the endpiont continuously and
produce a clunky noise. To re-calibrate the X and Y axis, rst turn o the machine,
then stick the calibration sticker on the stepper motor at indicated location below
(if there is already a sticker, then remove it). For Z axis, use a screw drive to turn the
adjustment screw at 1/4 turn steps on either direction.
!
Initialization
Button
!
SOCIAL MEDIA
SUPPORT
Email: [e-mail]
Forum: www.cetus3d.com/community
Facebook Group: Cetus3D Users
MANUFACTURER
Wuxi Tiertime Technology Co., Ltd
35-301 Changjiang South Road (by No.1 Road, Inner Ring),
Wuxi New District, Jiangsu 214142, P. R. China
Tel: [phone]
Email: [e-mail]
Quick Start Guide
Cetus3D
EN
X-Axis
Extrude
Withdraw
Stop
Save
3
Maintenance
Material
PLA
Weight
100g
Cancel
Maintenance
1
2
4
5
5