Data Sheet

UP mini 2 ES

3D Printer Accessibility Redeﬁned

The UP mini 2 ES is a more advanced mini 2 with updated hardware and

software. It retains its predecessor’s full enclosure with built-in HEPA

ﬁltration, providing a perfect combination of emissions protection and build

chamber temperature stability, crucial for ABS printing.

Key Features:

1. 4.3 Inch Color LCD Screen

2. Compatible with Tiertime Print Queue

3. HEPA and Activated Carbon Filter

4. Enhanced 3D printing workﬂow

Features Retained from the Original mini 2

- Wi-Fi (usage optional)

- 3rd party ﬁlament compatibility: 1.75 mm ABS and PLA

- Automatic Nozzle Height Detection with Software-Assisted Calibration

Features Explained:

1. 4.3 Inch Color LCD Screen

An updated control screen verses the original mini 2, it has more features

and functionality, plus the ability to be enhanced via future uploadable

screen upgrades.

a. Editable printer IP address

b. Print job storage

c. Print the stored model ﬁle using the touchscreen.

2. Print Queue

Allows multiple users to send print jobs from different devices to the same

printer via USB/Wi-Fi/LAN.

Sending a list of print jobs from controlling devices to a 3D Printer is

complicated and time-consuming. If there is only one 3D printer in the ofﬁce

and many designers need access, printer status must constantly be

monitored. Users must wait until previous print jobs are sliced, sent to the

printer and printed, which could take hours. Tiertime’s new Print Queue

allows more than one user to send print jobs to the printer simultaneously.

Files to be printed appear in the queue’s print list on a ﬁrst come, ﬁrst serve

basis.

1

PAGE 1
UP mini 2 ES 3D Printer Accessibility Redefined The UP mini 2 ES is a more advanced mini 2 with updated hardware and software. It retains its predecessor’s full enclosure with built-in HEPA filtration, providing a perfect combination of emissions protection and build chamber temperature stability, crucial for ABS printing. Key Features: 1. 4.3 Inch Color LCD Screen 2. Compatible with Tiertime Print Queue 3. HEPA and Activated Carbon Filter 4.
PAGE 2
Input sources for the Print Queue can include USB, Wi-Fi, and LAN. Whether you are a STEM teacher, a designer, an engineer or the proprietor of a miniature factory, the UP mini 2 ES Print Queue offers a robust, easilyaccessed, multi-job print experience for extended production cycles. 3. HEPA and Activated Carbon Filter 3D printing certain materials such as ABS can generate potentially harmful UFP and VOC emissions.
PAGE 3
Tiertime UP mini 2 ES Specification Table Printer Printing Technology MEM (Melted Extrusion Modelling) Extruder Single Nozzle Diameter 0.4mm Extruder Maximum Temperature 299℃ Extruder Maximum Travel Speed 150 mm/sec XYZ Accuracy 2, 2, 2 micron Connectivity USB cable, Wi-Fi, LAN and USB Stick Display 4.3″ Full Colored LCD Screen Build Volume 120 x 120 x 120 mm (4.7” x 4.7” x 4.7”)(XYZ) Printed Object Accuracy Layer Resolution ±0.15mm/100mm 0.15/0.2/0.25/0.3/0.