Instructions / Assembly

Instructions
1. Remove used filters from the manifold by
running to the left
2. Lightly lubricate the three black o-rings
seals in the manifold with food-grade lubricant
(not included).
3. Mark the install date on the new filters.
Install the new filters into the manifold by
turning to the right until the filter stops. DO
NOT OVERTIGHTEN.
4. Turn on faucet to release trapped air
(system may make noise).
5. Check for water leaks around the system
6. Flush system for 5 minutes.
7. Change filters every 6 months, please visit
www.Tier1Filters.com to reorder your filters.