Use and Care Manual

Figure 1.1
A. Attach brine well bracket (1) to brine tank by sliding brine well bracket over brine well, as shown
in Figure 1.1
B. Secure brine well bracket (2) to top hole of brine tank using threaded attachment, as shown in
Figure 1.1
C. Insert the PVC tube bushing, from parts bag B, into the end of the brine tube completely, as
shown below
ASSEMBLY INSTRUCTIONS
10
D. Feed PVC tubing (3) through the brine well bracket, as show in Figure 1.1
E. Remove connecting nut (4) from brine valve, as shown in Figure 1.1
F. Slide the brine valve nut (4) on over the PVC tubing, push tubing all the way into brine valve,
secure nut, as shown in Figure 1.1