Instructions / Assembly

SPECIFICATIONS
How Your Filter Works
Please review operating pressures, temperatures and water chemistry limitations to ensure compatibility.
5
BEFORE STARTING INSTALLATION
Tools, Pipe, and Fittings, Other Materials
Our systems are complete, self-contained, loaded with media and ready to use. Inlet and outlet fittings are included with the filter.
To maintain full valve flow, 3/4” or 1” pipes to and from the filter fittings are recommended. You should maintain the same, or
larger pipe size as the water supply pipe up to the inlet and outlet.
Use copper, brass, or PEX pipe and fittings. Some codes may also allow PVC plastic pipe.
Helpful Tools: screwdriver, Teflon tape, adjustable wrenches, razor knife
*Additional tools may be required if modification into home plumbing is required.
If you've opted to install both our Carbon and Scaleless systems please note the below:
Due to the unique properties of scaleless filtration, the scaleless system must be the last stage in the treatment chain.
Do not install any filters after scaleless or before any devices for which scale prevention is required. Point of Use filters, e.g.
carbon or RO are exempt from this requirement.
Do not apply phosphate or any other antiscalant either before or after Scaleless.
System Specifications
8000
10000
Service Flow Rates
Normal 5 gpm
7gpm
Filter Media Volume - Cubic Feet 75
ft
1.5 ft
Filter Tank Size
8
"x44"
10
"x54"
Media Type
Activated Carbon with KDF
Media Prel
oaded
Yes
Plumbing Connections
Includes 3/4” straight
adapters
Electrical Requirements
None
Water Temperature
41
- 100 degrees F
Max Water Pressure
125 psi
Media Lifetime
3
-5 years (depending on water quality)