Instructions / Assembly

4
4
A
B
Models
A
B
48"
8"
58"
10"
WARNING:
Prefilter must be installed level with tank head, as diagram below shows.
Discard all unused parts and packaging material after installation. Small parts remaining after the installation could be a
choke hazard.
SYSTEM DIMENSIONS
8000
10000
SAFETY GUIDE
For your safety the information in this manual must be followed to minimize the risk of electric shock, property
damage or personal injury.
Check and comply with your provincial / state and local codes. You must follow these guidelines.
Use care when handling the filter tank. Do not turn upside down, drop, drag or set on sharp protrusions.
PROPER INSTALLATION
This system must be properly installed and located in accordance with the installation instructions before it is used.
Use only
lead-free solder and flux for all sweat-solder connections, as required by state and federal codes. Maximum allowable inlet
water pressure is 125 psi. If daytime pressure is over 80 psi, night time pressure may exceed the maximum. Use a pressure reducing valve
to reduce the flow if necessary.