Instructions / Assembly

Page 4 of 8
TP250 Carriage Assembly Instructions
Plywood Brackets
Safety Pins
Step #6
Insert the plywood brackets into slots
on the front of the Platform base.
If you plan to use the plywood
brackets insert the short end into
the slots with the long end 90˚ up.
Insert safety pins on each bracket.
When not in use or during transport
turn the plywood brackets down 90˚
and insert safety pins on both sides.
Step #7
You have completely assembled the TP250
Carriage unit.
Please proceed to the TP250 Operations Manual
for further instructions.
When not in use or during transport
turn the plywood brackets down 90˚
and insert safety pins on both sides.
404-344-0000 • tiedown.com
605 Stonehill Drive SW, Atlanta, GA 30336
[e-mail]