Technical Specifications

Tie Down Engineering • 255 Villanova Dr. SW • Atlanta, Georgia 30336
1
Congratulations on your Purchase of the TranzSporter Lift Hoist.
The TranzSporter Lift Hoist was designed to provide safe and continuous operation.
Features Include...
• Collapsible carriage comes with track cam followers for better tracking and handling.
• Aluminum deck and flap for lighter weight and longer life.
• Rolled goods/plywood bracket comes with unit and pins into carriage.
• Motor base is manufactured using laser cut steel tubing for extra strength and durability.
• Belt guard and foot pedal are detailed with aluminum diamond plate.
• Dual versatile brake may be operated from either side of platform hoist.
• An additional handle may be used to engage the carriage instead of using the foot pedal (#48468 handle kit sold separately).
• A 4 ft. heavy duty aluminum base track utilizes laser cut steel tube support plates for job site toughness.
• Base track features large cast aluminum feet for added stability.
• Dual band brake system for smoother stops.
• Amber colored carriage bumpers to protect against damage and wear from repeated lowering (can be rotated).
• Oversized clip pins for fast and simple removal of quick change cable drum and belt replacement.
User Responsibilities
PERFORM THE FOLLOWING AT THE START AND END OF THE WORK DAY AND AFTER
4 HOURS OF OPERATION DURING THE DAY:
• Check oil level in engine and fill according to manufacturer’s specifications.
• Check cable for smooth operation and for signs of wear.
• Check for loose bolts and tighten according to specifications.
• Check track sections and all other moving parts for excessive wear or fatigue.
• Check general condition of equipment.
• Check and confirm operator’s understanding of the proper operation for this equipment.
• When using the electric motor; check extension cords and connections for wear or damage.
• Check brake parts regularly for wear or damage.
• Check cable drum bearings, they should run smoothly when the brake is released. If there is any noise or if the cable drum does
not spin freely, replace drum bearings immediately.
• Check for minimal clearance between outer track cam followers.
WARNING:
• DO NOT OPERATE THIS EQUIPMENT IF ANY UNSAFE CONDITIONS EXIST OR OCCUR DURING OPERATION.
• KEEP TRACK SECTION CLEAR OF ALL ELECTRICAL WIRES AND EQUIPMENT. ALWAYS LOOK UP FOR ELECTRICAL WIRE PRIOR
TO MOVING TRACK SECTIONS.
• BE AWARE OF OVERHEAD OBJECTS.
• NEVER USE TRACK SECTIONS AS A LADDER.
• NEVER OPERATE HOIST WITH A HUMAN ON PLATFORM.
• NEVER STAND UNDER PLATFORM WHEN LOWERING.
• NEVER USE INDOORS OR IN AN AREA WITH POOR VENTILATION (ELECTRIC MODEL IS EXCLUDED).
• NEVER USE HOIST TO LOWER MATERIAL.