Technical Specifications

Hoist Accessories
H
Solar/Plywood Panel Saddle Carriage
Allows lifting of four solar panels or plywood
sheets. Unique design allows panels to roll
off towards the contractor, preventing leaning
while on the roof top. Requires roof top
anchoring; straps included with carrier.
Solar/Plywood Panels attach to TP400
carriage frame. Solar/Plywood Panel Kit
#48469 is a complete carriage system for use
with the TP250.
Secondary Handle Kit
Allows use of a left side handle to
engage the motor and carriage. It
is highly recommended when
using with the Solar/Plywood
Saddle Carriage. Includes all
hardware brackets and handle.
Can be used for both TP250 &
TP400 models.
Part # Hoist Accessories
48467 TranzSporter Solar/Plywood panel accessory for TP400 Platform Hoist
48469 Complete Solar Carrier for TP250
48468 Secondary Handle Kit for TP250 & TP400
10092 4
ft. TranzSporter Track Section for TP250 and TP400
10091 8
ft. TranzSporter Track Section for TP250 and TP400
60005 Telescopic Support Brace for TP250 and TP400
48599 TranzSporter Stand-Off/Stabilizer
Telescopic
Support Brace
Used with TP250 &
TP400 models over
28 ft.
Telesco
p
Su
pp
ort
Used wi
t
TP400
m
28 ft.
Solar/Plywood Saddle
Stand-Off/Stabilizer
This unique stabilizer attaches
to the platform hoist track
section allowing proper
stand-off from roof and gutter.
Helps prevent costly gutter
damage when placed directly
on roof. Assembly required.
Roofing Products Division
TIE DOWN ENGINEERING
255 Villanova Drive SW • Atlanta, Georgia 30336
800-241-1806 • 404-344-0000 • Fax [phone]
ISO 9001:2008 Certification
Trade, brand, names and drawings are the intellectual property of
TIE DOWN ENGINEERING. ©2014 TIE DOWN, Inc.
Manual #08238 (Rev. 3-2-2015)