Installation Guide

9
/
12
5.Recommended Temperature/ Time Setting
Set the temperature and time according to the table below and get the specific
corresponding temperature and timing setting.(Temperature is measured in
Degrees Fahrenheit.)
A.Initial Temperature Setting (356℉)
Press the “SET”button ONCE, see the “Fahrenheit light” turning red. Then press
the“plus/minus key” to set the initial heating temperature.
B.Highest Temperature Setting ( Range:200-480℉)
Press the “SET” button for THE SECOND TIME; see the “Temperature
light”turning red. Then press the “plus or minus key” to set the highest heating
temperature.
C.Proper Heating Time Setting ( Range:0-999 sec.)
Press the “SET” button for THE THIRD TIME; see the”Time light” turning red.
Then press the “plus or minus key” to set the proper heating time.
Object
Temperature
Time
Application
Fiber/Fabric/Polyester/Cotton
(T shirt/ Mouse Pad)
320℉
（160℃）
15s
Heat Painting Film
330℉
（166℃）
15-20s
HTV Vinyl
340℉
（172℃）
50-60s
Sublimation
Transfer Paper
Metal Card/Aluminium Card
356
℉
（
180
℃）
60s
Metal Card