Specification

S730

Belfast Series

Undermount Vanity Sink

Features

• Contemporary Zero Radius Rectangular Design

• No Overow Drain

• 18 Guage 304 Grade Stainless Steel

• No Faucet Holes

• Requires Wall or Counter-Mount Faucet

• Limited Lifetime Warranty

Compatible Accessories

MIB-U Mounting and Installation Brackets

TS730 Sink Cut-Out Template

Installation Instructions

Codes/Standards

ASME A112.19.3/CSA B45.4

1-(503) 455-8336

Sink specications may change without notice. Please visit www.ticorsinks.com for the most current

information. Updated 03/21/2018

1 of 2

PAGE 1
S730 Belfast Series Undermount Vanity Sink Features • • • • • • Contemporary Zero Radius Rectangular Design No Overflow Drain 18 Guage 304 Grade Stainless Steel No Faucet Holes Requires Wall or Counter-Mount Faucet Limited Lifetime Warranty Compatible Accessories MIB-U Mounting and Installation Brackets TS730 Sink Cut-Out Template Installation Instructions Codes/Standards ASME A112.19.3/CSA B45.4 1-(503) 455-8336 Sink specifications may change without notice. Please visit www.ticorsinks.
PAGE 2
S730 Belfast Series Undermount Vanity Sink 201⁄2” 19” 71⁄8” 14¼” 12¾” 13⁄4” 10¼” 5¾” Technical Information • • • • • • • • • • Sink Collection: Belfast Series Sink Model Number: S730 Sink Length (inches): 201/2 Sink Width (inches): 141/4 Sink Basin Depth (inches): 53/4 Drain Opening (inches): 13/4 Drain Position: Center Bowl Configuration: Single Installation Type: Undermount Minimum Sink Base Cabinet Width Required: 21” (Cabinet May Require Additional Modifications at Minimum Size.