User Manual
Table Of Contents
- Product Overview
- Features
- Use Conditions
- Precautions/Safety
- Appearance Overview
- Specifications
- Controller
- Basic model - double control switch
- 1) Power-on/off
- 2) Fan speed regulation
- Upgraded version - LCD controller
- 1) Power-on/off
- 2) Fan speed regulation
- 3) Work duration threshold setting for the filter
- 4) Filter reset
- High configuration version - Intelligent controller
- 1) Power-on/off
- 2) Fan speed regulation
- 3) Operating mode switching
- 4) Auto mode
- 5) Filter reset
- 6) Timed on/off and time adjustment
- Installation
- Electrical Principle Diagram
- Electrical Installation
- Operation and Maintenance
- After-sales Service
2
Use Conditions
1. Outdoor air conditions
The temperature range is –10°C to 40°C and the relative humidity is 85% or lower. If
the temperature is lower than –10°C, it is recommended to configure a pre-heating
function section separately.
2. Indoor air conditions
The temperature range is 0°C to 40°C, and the relative humidity is 85% or lower.
3. Installation requirement
It is the same as the indoor environment (the indoor environment here is the
environment in an air conditioned living room). This product cannot be used in a cold
storage or other places where temperature fluctuates drastically, even if the above
temperature range is satisfied.
Precautions/Safety
1. Precautions
TICA may improve and change the product without prior notice.
TICA shall not be responsible for the damage accident that occurs because the
equipment operates beyond the conditions defined in this manual.
Do not use the product for other purposes such as cooling, drying, and heating.
2. Safety
Do not alter the product in any forms.
Observe the maintenance instructions lest the device would be damaged or over-
worn.
Do not expose the device to the environment of atmospheric medium (e.g.,
rainwater and sunlight).
Do not place anything on the product.
Only professionals can complete the internal maintenance and cleaning work of
the product.